Plx-devices SM-FP Bedienungsanleitung PDF herunterladen

Users Guide: iMFD Sensor Module

Version 1.0 March 14, 2008

www.plxdevices.com

(408)745-7591

iMFD Sensor Module SM-Fluid Pressure

*Please read the instructions completely through at least once before proceeding with the

installation to minimize errors.

*DO NOT use this sensor for Fuel Pressure sensing purpose

*Double check polarity of power before powering it on for the first time.

Overview:

(Figure 1) (Figure 2)

1. Connects to 12V-18V power source.

2. Analog outputs (0-5V linear output) *For sensor #1 ONLY

3. Termination jumper. Closed for first SM in iMFD daisy chain.

4. Connects to next SM in iMFD daisy chain or to first DM

5. Connects to previous SM or unconnected if first SM in iMFD daisy chain

6. Connects to PLX Fluid Pressure Sensor. Up to 2 sensors can be connected for 2 channel operation.

7. Fluid Pressure Sensor (150psi). (*Using a sensor not provided by PLX Devices may lead to inaccurate readings due to a

mismatch in calibration)

8. 24k Gold Ring Terminal

9. Molex Connector Terminals

10. Molex 2 Pin Connector

Install the Fluid Pressure Sensor:

1. The PLX Fluid Pressure probe screws into a 1/8 NPT tap.

2. Connect the fluid pressure sensor with the provided 2 pin Molex connector according to the following diagram. It should

connect to the port “G” on the sensor. Connections can be made by crimping the terminals or soldering the terminals

with the provided wire. *Note the orientation of the Molex 2 pin connector. A reverse connection will result in inaccurate

readings and may damage the device.

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 iMFD Sensor Module SM-Fluid

Seite 2 - POWERING ON

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 (Figure 3a) (Figure 3b, Port “G”) Connecting Po

Seite 3 - Output Voltage

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 (Figure 5) Using the Sensor Module Analog Output: 1. Th

Seite 4

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 While the power input of the lamp and buzzer can be 1

Seite 5

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 Recommended Accessory: (Figure 10) DM-5 Fluid Press

Seite 6 - Revision History

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 LIMITED WARRANTY PLX Devices Inc. warrants this produc

Kommentare zu diesen Handbüchern

Keine Kommentare

Plx-devices SM-FP Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Plx-devices SM-FP herunter. PLX Devices SM-FP User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Plx-devices SM-FP